STORZ & BICKEL VOLCANO CLASSIC MANUAL
This QUICK START MANUAL will guide you through the main steps on how to use your new VOLCANO CLASSIC.
Please clean the Mouthpieces before use.
QUICK START MANUAL
1. Switch heat on (takes 3-5 min.)
2. Choose temperature.
3. Grind substance.
4. Fill filling chamber.
5. Insert Filling Chamber Insert.
6. Preheat substance if control lamp is off.
7. “Click” Valve Balloon on Filling Chamber.
8. Watch vapour density.
9. Remove full Balloon Unit.
10. Detach Valve Balloon from Filling Chamber.
11. Caution! Hot surface! Never leave Filling Chamber on VOLCANO.
12. “Click” Mouthpiece on Valve Balloon.
DISMANTLING, CLEANING, REPLACING
1. Pull off Lip Piece.
2. Dismantled Mouthpiece.
3. Pull off Slipring and Balloon.
4. Screw off Valve Cap.
5. Dismantled Valve.
6. Screw off nut from Filling Chamber Insert.
7. Dismantled Filling Chamber Insert.
8. Pull off Filling Chamber Ring.
9. Screw off Filling Chamber Cylinder.
10. Dismantled Filling Chamber.
11. Manual cleaning with alcohol (min. 90%), also dishwasher safe.
12. Cut off a piece of approx 50-60cm (19-23 inch).
13. Tie close at one end.
14. Attach Balloon Fixation Ring.
15. Attach Balloon to Valve.
16. Align Valve Balloon to Valve.
17. Evert balloon mantle.
18. Attach Slipring to secure Balloon.
19. Ready to use.
![Volcano Accessory - Wear & Tear Set [Easy Valve] Storz & Bickel](http://thebongshop.com.au/cdn/shop/products/11_06_1.png?v=1679617139&width=1)
![Volcano Accessory - Wear & Tear Set [Easy Valve] Storz & Bickel](http://thebongshop.com.au/cdn/shop/products/11_06_1.png?v=1679617139&width=600)
